Click image to view full size image
PRODUCT FEATURES:
1、Straight row of high efficiency.precision ball screw vice more accurate.
2、Totally enclosed protection, better protection of rail, wire rod and bearing.
3、The castings of machine tools are all made of grey cast iron.After artificial aging treatment，the stability is good，the strength is high，and the precision is stable and reliable.
4、the machine tool X / Z two axis slide rail are used in Taiwan on the silver provided P level. Reduce the friction between the guide rails significantly, decreasing the possibility of crawling and improving machine tool movement precision.
|
XC-46YMC Technical Specifications |
|||
|
Project |
Name |
Specification |
Units |
|
Travel |
X axis |
1000 |
mm |
|
Z axis |
500 |
mm |
|
|
Table |
Table size |
760×250 |
mm |
|
T Slot(No.×Width×Distance) |
4×12×50 |
mm |
|
|
Max.load |
250 |
kg |
|
|
Spindle |
Taper hole of spindle |
40 |
Degree |
|
Clamping mode |
Hydraulic / Pneumatic |
||
|
Driving mode |
Belt drive |
||
|
Spindle speed |
50-5000 |
rpm |
|
|
Motor |
Spindle motor |
5.5 |
kW |
|
X axis motor |
7.7 |
N·m |
|
|
Z axis motor |
7.7 |
N·m |
|
|
Feed |
X axis rapid traverse |
20000 |
mm/min |
|
Z axis rapid traverse |
20000 |
mm/min |
|
|
Accuracy |
Positioning accuracy |
±0.003 |
mm |
|
Repeatability precision |
±0.003 |
mm |
|
|
Other |
Machine weight（about） |
3000 |
kg |
|
Overall dimension(L×W×H) |
2200×1655×1800 |
mm |
|
|
Air pressure demand |
0.4-0.8 |
kg/cm² |
|
|
Power capacity |
7 |
kW |
|
Differences between CNC and Conventional Lathes
CNC stands for Computerized Numerical Control that means that a CNC lathe is controlled by a computer. It moves automatically. In the other hand, in conventional lathes series, all the movements are manually done by the operator.
The big advantage of a CNC lathe over the conventional is that once it is prepared to run (program and set-up) by a skilled technician, it requires a less skilled operator to load raw material, push “the green button” and inspect the parts made. While a conventional lathe requires a skilled technician to make every single part.
To some extent, a CNC machine is less complicated than a conventional machine, because the computer can move all axes simultaneously with high precision. Doing arcs, for example, is easy in a CNC while in a conventional it will require a special tool or an accessory.
It can be done with 3 tools in a CNC lathe: A tool for facing, turning the cylinders, tapers and the convex arc, a tool for cutting the threads and a tool for cutting the concave arc and cut-off the part. A similar part with different tapers and arcs will use the same tools and minor changes to the program.
FAQ：
1、How long can I get a reply?
We will get back to you within 24 hours.
2、How can I know your machine works well?
Before the machine is shipped we carry out the appropriate operational tests to ensure that it works perfectly.
3、Can you provide a detailed drawing or video of the machinery accordingly?
Of course you can, you can contact us for any need to know more about our products.
http://www.haofengcncmachine.com/